Cabinet (L); St Cabinet (Upper) Assembly - Sony DCR-PC103E Service Manual

DCR-PC103E/PC104E/PC105/PC105E

2-4. CABINET (L)

2-5. ST CABINET (UPPER) ASSEMBLY

(PC105/PC105E)
EG grip
3
(M1.7 × 2.5)
5 Two claws
4 Two claws
Caution
Note: The power supply capacitor of the flash unit is charged to the high tension
voltage as high as 300 V at a maximum. You will get electrical shock when
you touch the terminal of the charged capacitor . The charged potential
remains even after the main power of the machine is turned off. Discharge
the remaining power in the capacitor referring to Service Note
(See page 1-2). High-voltage cautions. Short jig (R: 1k Ω /1W)
2 Flip over the jack cover
(L) assembly.
Screw
1
(M1.7 × 4),
lock ace, p2
ST cabinet (upper)
6
assembly
2
1 Push the portion A in the
direction of the arrow to open
the Flash.
A
5 Cabinet (L)
Screw
3
(M1.7 × 2.5),
lock ace, p2
(PC103E/PC104E)
EG grip
(M1.7 × 2.5)
1
Accessory shoe GND
2-4
Three screws
4
(M1.7 × 2.5),
lock ace, p2
6 Jack cover (L) assembly
ST cabinet (N)
3
assembly
EG grip
2
(M1.7 × 2.5)
EG grip
(M1.7 × 2.5)
Short jig (R: 1k Ω /1W)
Xenon tube