Recorder Settings (Basic) - Sony RDR-HX750 Operating Instructions Manual

Recorder Settings
(Basic)
The "Basic" setup helps you to make clock
and other recorder related settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Basic," and press ENTER.
The "Basic" setup appears with the
following options. The default settings
are underlined.
To turn off the display, press SYSTEM
MENU.
Clock Setting
Auto (Auto Clock Set)
This function cannot be used in your area.
Manual (Manual Clock Set)
Set the clock manually.
1
Select "Clock Setting" in "Basic," and
press ENTER.
2
Select "Manual," and press ENTER.
3
Press </, to select the time zone for
your area, and press m.
4
Select "On" using </, if you are now
on summer time, and press ENTER.
5
Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
To change the numbers, press < to
return to the item to be changed, and
press M/m.
6
Press ENTER to start the clock.
Display
Selects the clock and date display.
1
Select "Clock Setting" in "Basic," and
press ENTER.
2
Select "Display," and press ENTER.
3
Select the display type using M/m.
4
Select the format using </,.
Input Line System
Selects the colour system when recording
from the connected equipment.
NTSC Records in NTSC or PAL-60
colour system.
PAL/ Records in PAL or SECAM
SECAM colour system.
b
Notes
• When picture noise appears after you change the
"Input Line System" setting, change the "Input
Colour System" setting (page 102). If picture
noise still appears, hold down x (stop) on the
recorder, and press INPUT on the recorder.
• When you change the "Input Line System"
setting, the Dubbing List is erased.
97
,continued