Fixing Paper Jams; Ieee 1394 Firewire Scanner Interface Card - Epson Expression 1600 User Manual

Fixing Paper Jams

If a paper jam occurs, follow these steps to
clear it:
1. Open the automatic document feeder's
cover, as shown.
2. Pull forward on the jam-release lever, and
slowly pull the jammed paper out of the
feeder mechanism. Be careful not to tear the
paper.
3. After removing the jammed paper, close the
document feeder cover. Make sure the
ERROR
isn't flashing.

IEEE 1394 FireWire Scanner Interface Card

To use the IEEE 1394 FireWire scanner interface card, your system must have either
a built-in IEEE 1394 FireWire port or an IEEE 1394 FireWire PCI card, and must
be running Macintosh OS 8.6 or later with FireWire Update 2.1 or later.
This section explains how to install the IEEE 1394 FireWire scanner interface card in
your scanner, and how to connect the scanner to your computer.
If you have the Professional FireWire model of the EPSON Expression 1600, the
card was preinstalled in your scanner. Go to "Connecting to an IEEE 1394
FireWire Interface" on page 29.
If you purchased the IEEE 1394 FireWire scanner interface card as an option,
continue with the next section.
106
light is off and the
READY
When you install the scanner software, FireWire Update 2.1
will automatically be installed or updated, if it's not already on
your Macintosh or if you have an older version.
jam-release lever
light
cover