HP ProLiant DL320 Quick Setup Poster page 2

3. At the Computer Name and Administrator Password page:
a. In the Computer name text box, enter the computer
name recorded on the network information card.
b. In the Administrator password text box, enter the
administrator password created as part of completing
the network information card. The administrator
password is used to obtain administrator privileges to
manage the ProLiant DL320 Firewall/VPN/Cache
server.
c. In the Confirm password text box, enter the
administrator password again, and click Next.
4. At the Date and Time Settings page:
a. Select the correct date and time.
b. Select the correct time zone. If your area uses daylight
savings time, select the Automatically adjust clock for
daylight saving changes checkbox.
c. Click Next.
The Networking Settings page displays the progress of network
services invocation.
5. At the Internal Connection TCP/IP Settings page:
a. Select Use the following IP address.
NOTE:
If there is a DHCP server in the internal net-
work, and a fixed address was reserved for the
firewall, select Obtain an IP address
automatically.
b. In the IP address and Subnet mask text boxes, enter
the network IP addresses recorded on the network
information card for the internal network interface IP
address and the subnet mask IP address.
c. Select Use the following DNS server addresses.
d. In the Preferred DNS server text box, enter the DNS
server IP address. If there is an alternate DNS server,
enter the IP address in the Alternate DNS server
text box.
e. Click Next. The External Connection TCP/IP Settings
page provides the details for the external
network adapter.
6. If using a static IP address supplied by an Internet service
provider (ISP), select Use the following IP address, and enter
the IP addresses to use. Otherwise, select Obtain an IP
address automatically.
NOTE:
Automatically obtaining an IP address on the
external network interface might result in a warning
indicating that the ISP can coincidentally assign the
external NIC an IP address in the same network as the
internal network interface.
To avoid configuring the external network interface, select the
Skip this step checkbox. HP recommends configuring this
interface at this time because the firewall is already enforcing
a strict security policy.
7. Click Next.
8. At the Workgroup or Computer Domain page, either select
Domain and enter the appropriate domain name, or select
Workgroup and enter the name of the workgroup recorded
on the network information card.
NOTE: When adding the server to a Windows
domain, the domain group policies are applied to the
server. If you are unsure of which option to select, HP
recommends selecting the Workgroup option. A
domain can be joined anytime after setup completes.
9. Click Next.
The ProLiant DL320 Firewall/VPN/Cache server performs some
final tasks, as displayed on the Performing Final Tasks page,
and automatically restarts.
10.
Log on to the server using the administrator password
previously established.
HP Virus Throttle
HP Virus Throttle, a network packet-filtering feature that helps
slow the spread of viruses, is automatically installed and
enabled when you log on to the server for the first time. The
installation requires no user interaction and takes only a few
moments. When the installation is complete, the server auto-
matically reboots.
For information about configuring Virus Throttle, refer to the "HP
Virus Throttle" section of the HP ProLiant DL320 Firewall/VPN/
Cache Server User Guide included with the server. For addi-
tional in-depth information about Virus Throttle, refer to the HP
ProLiant Essentials Intelligent Networking Pack User Guide at
http://h18004.www1.hp.com/
products/servers/proliantessentials/inp/index.html.
6
Configuring the ProLiant DL320
Firewall/VPN/Cache server
The installation is complete. The ProLiant DL320 Firewall/VPN/
Cache server is a powerful network access control device that
can be configured to enable internal network clients to access
the Internet, set up as a virtual private network (VPN) server,
and set up to allow secure connections from Internet users to
servers on the internal network.
For additional setup and configuration options, refer to the HP
ProLiant DL320 Firewall/VPN/Cache Server User Guide.
When logging on to the ProLiant DL320 Firewall/VPN/Cache
server for the first time, read the information displayed on the
Getting Started page. This information guides you through the
basic configuration steps. (This page can be accessed at
anytime by clicking the node with the server name on it.)
NOTE: At the Getting Started page, HP recommends
clicking Define your ISA Network Configuration. This
starts the Network Template Wizard, which quickly sets
up an initial policy configuration based on your
preferences and network topology.