Table of Contents
Advertisement
3.1.3
Installing and Removing an Intel Pentium II
Xeon Processor
This section describes how to install and remove an Intel Pentium II Xeon
processor.
Installing an Intel Pentium II Xeon processor
Follow these steps to install a Pentium II Xeon processor:
1. Attach the fan/heatsink module to the Pentium II Xeon processor and secure
it with four screws.
2. Remove the left panel of the housing. See section 2.2 for more information on
opening the housing panels.
3. If there is an existing termination board installed in the CPU slot, remove it.
Refer to section 3.1.4 for information about removing a termination board.
3-8
Altos 21000 Series User's Guide
The thermal cable and heatsink fan cable
must be on the bottom.
Advertisement
Table of Contents
