Dvd Settings And Adjustments; Audio Setup; Screen Setup - Sony SLV-D300P Service Manual

DVD Settings and Adjustements

Audio Setup

"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode.
The "SETUP MENU" appears.
2
Press V/v/B/b to select
then press ENTER.
The "DVD SETUP" menu appears.
3
Press V/v to select "Audio Setup," then press
ENTER.
48
Audio Setup
Notes
• If you select surround setting while playing a DVD, the player does not output Dolby Digital
signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set
"Dolby Digital" to "D-PCM").
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
50
Audio Setup
SET UP
V/v/B/b
ENTER
O RETURN
(DVD Setup),
4 Press V/v to select the setup item from the displayed list:
"Dolby Digital," "DTS," or "Audio DRC."
5 Press B/b to select an item, then press O RETURN to confirm the setting.
6
Press O RETURN repeatedly to exit the menu.
Menu choices
• Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• DTS (DVD only)
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
On
• Audio DRC (Dynamic Range Control) (DVD only)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to "D-PCM".
The default setting is indicated in bold print.
Standard
TV Mode

Screen Setup

"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode.
The "SETUP MENU" appears.
2
Press V/v/B/b to select
then press ENTER.
The "DVD SETUP" menu appears.
3 Press V/v to select "Screen Setup," then press
ENTER.
1-11
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
Normally select this position.
Makes the low sounds clear even if you turn the volume down.
continued
Audio Setup
SET UP
V/v/B/b
ENTER
O RETURN
(DVD Setup),
continued
Screen Setup
49
51