EPSON Stylus PHOTO 895/785EPX/915/825
4.2.9 LD Roller removal
1.
Remove the Housing from the printer. (Refer to Section 4.2.1 "Housing
Removal")
2.
Take the Head FFC off from the Head FFC holder located along the LD roller
shaft holder.
Head FFC holder
Figure 4-26. Taking Head FFC out from the FFC holder
Disassembly and Assembly
LD roller shaft holder
Disassembly
3.
Remove two screws (C.B.S 3x6 F/ZN) securing the LD roller holder to the Main
frame.
C.B.S 3x6, F/ZN
LD roller holder reinforcement board
Figure 4-27. Removing two screws securing the LD roller holder
Tightening Torque for screw
• C.B.S 3x6, F/ZN screw for screw securing the LD roller holder: 9 +/- 1 kgf.cm
• C.B.S 3x8, F/ZN screw for screw securing the LD roller holder: 9 +/- 1 kgf.cm
Revision B
C.B.S 3x8, F/ZN
LD roller cover
90