Connecting To The Computer - JVC HD-56FH97 User Manual

Connecting to the computer

(HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97, HD-61FN97 and HD-70FN97 ONLY)
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-3 audio input terminal to the computer's audio output terminal.
Notes:
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the
sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.
Notes:
• When the sound from the computer is connected to INPUT-3 by choosing external input
INPUT-3, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
Downloaded from www.Manualslib.com manuals search engine
S-VIDEO
OVER
S-VIDEO
TV Rear Panel
OVER
CENTER CHANNEL INPUT
S-VIDEO
MONITOR
/REC OUT
75Ω
(VHF/UHF)
Quick Setup
VIDEO R - AUDIO - L
INPUT-1
VIDEO R - AUDIO - L
INPUT-2
VIDEO R - AUDIO - L
INPUT-3
R - AUDIO - L
HDMI 1
Y Pb Pr
INPUT-1
Y Pb Pr
INPUT-2
VIDEO R L
R L
AUDIO
OUTPUT
INPUT-3
PC IN
(D-SUB)
25