AEG CTV 4952 LCD/DVD/DVB-T Instruction Manual page 49

7“ tft-tv/dvd player incl. dvb-t
Table of Contents

Advertisement

Available languages

Available languages

Use of ear/headphones (Fig. 1/7)
Antenna connections
Inputs on the side of the device
Switching on the player (Fig. 1/3)
1. If you use a set of headphones you should use one with a 3.5 mm
stereo jack, which should be inserted into headphone socket ( ).
2. With the VOL+/VOL- buttons (Fig. 1/10, 16) on the device or the
cursor buttons (/) (Fig. 2/9) on the remote control you can set
the desired volume.
WARNING:
Make sure that the volume of your headphones or earphones is
not too high, as otherwise this may damage your ears and you may
endanger yourself or others.
In order not to disturb those around you the volume should be set
to a low level.
If you suffer from tinnitus you should turn the volume down low
or refrain from using this device.
Ear doctors recommend that earphones should not be used conti-
nuously over a prolonged period.
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifier.
1. Insert the audio plug into the socket on the right-hand side of the
device (Fig. 1/6).
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifier.
Antenna Input (Fig. 1/20)
NOTE:
Please ensure that it is possible to receive DVB-T signals in your area.
Information on the transmission area is available on the Internet
under:
http://www.ueberallfernsehen.de, or from your specialist dealer.
This device has a built-in DVB-T receiver.
In order to be able to receive digital terrestrial channels with the built-in
DVB-T receiver it is necessary to connect your permanently installed
house aerial.
If you are located in the central section of the transmission area you can
also use an optional passive or active DVB-T aerial.
• Connect the cable from your DVB-T aerial system or your DVB-T
room aerial to the ANT. Socket on the left-hand side of the device.
USB Input (on the right-hand side of the device) (Fig. 1/8)
Insert a USB storage medium directly into the corresponding socket on
the right-hand side of the device.
Turn on the main switch of the DVD player by moving the „ON/OFF"
switch on the right-hand side of the device to the „ON" position.
English
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctv 4952

Table of Contents