Change Dvd Default Setting - AEG CTV 4944 DVB-T/DVD Instruction Manual

English
72
Understand Menu Structure
Using the Menu
Main Menu Overview

Change DVD Default Setting

A larger number of default settings can be comfortably changed via
the screen menu.
Press the SETUP button (Fig. 3/20) on the remote control to start the
menu for changing the default settings.
NOTE:
Many of this default settings can be changed using the remote control
as well as the menu. The difference is: If you change the default set-
tings with the remote control, the changes will reset upon turning off
the DVD Player or removal of the DVD. Changes made using the menu
are permanent.
Within the menu setup you will find two menu levels:
■
Main menu:
The main menu is displayed by graphic symbols.
■
Sub-menu:
Within every main menu entry you will find the cor-
responding sub-menu entries.
Navigation and Selection
■
Within the main menu you will navigate using the
buttons (Fig. 3/21) of remote control (u/t).
■
You can navigate the sub-menu using the
(q/p).
■
Select a specific menu section by pressing the
(Fig. 3/22).
■
Select an option (e.g. "PAL" in the Figure on the left) also with
ENTER. The selected option (PAL in this example) is highlighted.
Slide Control
Some menus feature slide control that will enable you to adjust, for
example, the volume or screen intensity. Please use the control as
follows:
1. Select it with the ENTER button.
2. Navigate the control with the navigation buttons (▼/▲).
3. Confirm with the ENTER button.
■
General Setup (1)
■
Audio Setup (2)
■
Dolby Digital Setup (3)
■
Preferences (4)
■
Password Setup (5)
NOTE:
Some menu settings are available in stop mode only (contingent on
DVD).
navigation
navigation buttons
ENTER button