Adjustment Data Setting - Panasonic PT-EX600U Service Manual

Servicing Notice

2. Adjustment data setting

This projector stores " Color shading correction data" and "Gamma correction data" in the memory IC (IC801) on the
main board. Those adjustment data have been setup according to the optical characteristics of the mounted LCD pan-
els preciously in the factory. When replacing the main board, you need to read out the those setting data stored in the
memory IC on the previous main board and write down them into the memory IC on the new main board by using the
software [PROJECTOR SERVICE TOOL v4.20]. By the way, it enables the projector to reproduce the picture which
has properly adjusted color shading correction, gamma correction. For further details, refer to the operation manual
of the software [PROJECTOR SERVICE TOOL v4.20].
Note:
"Color shading correction data" and "Gamma correction data" cannot be read out or wrote in by the software [NVRead-
Write]
The NVRedWrite v1.0.0.0, projector service tool v4.20 and serial no. setting tool v1.00 can be
downloaded from the projector service web site.
-40-