NEC M155 User Manual page 47

PressBothKeysLong
PressLowerKeyShort
PressUpperForScroll
PressUpperKeyShort
ReqLanguage
ReqMelody
ReqOptionValue
RequiredNumberName
ReqDigit
ReqMessageFromInbox
ReqMessageFromDrafts
ReturnToIdle
SelectByPressUpperKeyShort
ConfigureNameNumber
PoweredOff
ReturnToCall
SilentOnOffInfo
NotificationOnOffInfo
ExistingCallCleared
Translation tables
Simultaneously press both keys for two
seconds or more.
Press the Lower key for a short time.
The new message is displayed upon
receipt.
If the message is too large to show on
the display in one go, use (repeatedly)
pressing the Upper key for a short time
to scroll through the message.
Press the Upper key for a short time.
the required language (e.g., English)
the required melody.
the required option value
required number and (optionally) the
related name.
the required digit.
the required message stored in the
Inbox of the M155.
the message you want to send.
The M155 returns to the idle mode.
Repeatedly press the Upper key for a
short time until the display shows:
Configure the number and name of
your M155 by means of the DECT
Handset Configurator Application
(available to your System
Administrator).
The display shows Goodbye, and then
becomes blank - the M155 is powered
off.
The M155 returns to the call mode.
On: no audible ring tone or notification
given
Off: audible ring tone or notification
given.
On: audible notification given
Off: no audible notification given.
If the M155 is already involved in a
voice call, this voice call will be cleared
first.
(On or Off).
47