Renew Dhcp Network-Port; Show Arp Switch - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
ping
renew dhcp network-port
Use this command to renew the IP address on the network management interface
by using DHCP.
renew dhcp network-port
Command Modes
Privileged Exec
Related Commands
Command
show network
show arp switch
Use this command to display the contents of the switch's Address Resolution
Protocol (ARP) table that contains entries learned through the Management port.
show arp switch
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show arp switch
MAC Address
------------------- ---------------- ------------
00:00:0C:07:AC:2A
00:1A:A0:31:A9:6A
Description
Determines whether another IPv4 computer/host is on the
network.
Description
Displays the configuration settings associated with the
switch management interface.
IP Address
Interface
10.131.16.1
Management
10.131.17.73
Management
10
400
Advertisement
Table of Contents
