Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG 84LM9600-UB
Summary of Contents for LG 84LM9600-UB
- Page 1 OWNER’S MANUAL LED TV* * LG LED TV applies to LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 84LM9600-UB *MFL67652637* www.lg.com P/NO : MFL67652637 (1312-REV00)
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. - Page 3 IMPORTANT SAFETY INSTRUCTIONS Do not press strongly upon the panel with a hand Keep the packing anti-moisture material or vinyl Power Supply or a sharp object such as a nail, pencil or pen, or packing out of the reach of children. Anti-moisture Short-circuit Breaker make a scratch on it.
- Page 4 Do not install in excessively Do not attempt to modify this product in any way dusty places. without written authorization from LG Electronics. If you smell smoke or other odors coming from Unauthorized modification could void the user’s the TV, unplug the power cord and contact an authority to operate this product.
-
Page 5: Fcc Notice
IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen FCC NOTICE while you’re viewing the TV. -
Page 6: Viewing 3D Imaging
Cautions when using the 3D glasses Symptoms which require discontinuation or refraining from watching 3D content Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos Do not watch 3D content when you feel properly. -
Page 7: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 8: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS MAGIC REMOTE CONTROL FUNCTIONS Viewing 3D Imaging Registering Magic Remote Control How to use Magic Remote Control LICENSES Precautions to Take when Using the Magic Remote Control OPEN SOURCE SOFTWARE NOTICE WATCHING TV TABLE OF CONTENTS Turning the TV on for the First Time... -
Page 9: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. - Page 10 ASSEMBLING AND PREPARING ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Magic Remote Control, Owner’s Manual Cinema 3D Glasses Batteries (AA) The number of 3D glasses (See page 28.) may differ depending upon the model or country.
-
Page 11: Optional Extras
Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies. AN-MR400 AG-F*** AG-F***DP Magic Remote Cinema 3D Glasses Dual Play Glasses LG Audio Device... -
Page 12: Parts And Buttons
ASSEMBLING AND PREPARING Parts and Buttons Screen SETTINGS INPUT Remote control sensor Speakers Buttons Logo light Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. (SETTINGS) Changes the input source. -
Page 13: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and Moving the TV When transporting a large TV, there should be at least 2 people. When transporting the TV by hand, hold the When moving or lifting the TV, read the following TV as shown in the following illustration. to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 14: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION When attaching the stand to the TV set, using 2 people, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. -
Page 15: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a Table Adjusting the angle of the TV to suit view Swivel 7 degrees to the left or right and adjust Lift and tilt the TV into its upright position on the angle of the TV to suit your view. a table. -
Page 16: Tidying Cables
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) Tidying cables Gather and bind the cables with the cable management. Insert and tighten the eye-bolts, or TV Cable brackets and bolts on the back of the TV. Management - If there are bolts inserted at the eye-bolts position, remove the bolts first. -
Page 17: Mounting On A Wall
TV. Otherwise electric shock instructions will be included with the wall mount. may occur. We recommend that you use an LG brand wall If you install the TV on a ceiling or slanted mount. wall, it may fall and result in severe injury. -
Page 18: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. -
Page 19: Connecting To A Hd Receiver, Dvd Player Or Vcr
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 20: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. -
Page 21: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone screen on the TV. This only works with an MHL-enabled phone. -
Page 22: Component Connection
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. -
Page 23: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. -
Page 24: Connecting A Pc
MAKING CONNECTIONS Connecting a PC NOTE It is recommended to use an HDMI connection for the best image quality. Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. - Page 25 MAKING CONNECTIONS Method B: dVI to HdMI Connection Choose any HDMI input port to connect. It does not matter which port you use. (*Not Provided) YELLOW (*Not Provided) AUDIO OUT DVI OUT...
-
Page 26: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. -
Page 27: Connecting A Usb Device
MAKING CONNECTIONS Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files. NOTE Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it directly to the USB port on the TV. -
Page 28: Magic Remote Control Functions
MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS Change the battery. Magic remote control battery is low. When the message displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. -
Page 29: Registering Magic Remote Control
MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. Please register the remote as follows. How to register the Magic Remote Control To register automatically, turn the TV on and press the Wheel (OK). -
Page 30: Watching Tv
WATCHING TV WATCHING TV Confirms the setting Setting is complete options. Turning the TV on for the First Time Simple guide of Magic Experience Magic Remote Control Remote Control (Depending upon model) When you turn the TV on for the first time, the Initial setting screen appears. -
Page 31: Using The User Guide
An index of key words present in the User Guide. Provides the detailed information on the functions of LG Smart TV when the User Guide Internet is connected. (It may not be available depending upon the country/language.) OPTION >... -
Page 32: Specifications
Storage Temperature -20 °C ~ 60 °C (-4 °F ~ 140 °F) Storage Humidity Less than 85 % 84LM9600 MODELS (84LM9600-UB) 1,916 x 1,214 x 399 (mm) With stand 75.4 x 47.7 x 15.7 (inch) Dimensions (Width x Height x Depth) 1,916 x 1,120 x 39.9 (mm) - Page 33 SPECIFICATIONS HDMI (DTV) supported mode Signal Component 480i Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 480p 31.469 59.94 720p/1080i 720 x 480 31.50 60.00 1080p 44.96 59.94 (60 Hz only) 1280 x 720 45.00 60.00 Wireless LAN module (WN8122E1) specification 33.72 59.94 33.75...
- Page 34 SPECIFICATIONS [ULTRA HD] Video Supported Codec Maximum : 3840 x 2160 @ 30p Maximum data transfer rate 3840 x 2160 (H.264 L5.1) : 50Mbps (megabits per second) Extension Codec Video H.264 / AVC .mkv / .mp4 / .ts Audio Dolby Digital, Dolby Digital Plus, AAC, HE-AAC Audio Dolby Digital, Dolby Digital Plus, AAC, HE-AAC NOTE...
- Page 35 SPECIFICATIONS 3D supported mode Video, (Media Content) which is input as below is automatically switched into the 3D screen. 3D supported mode automatically Horizontal Vertical Frequency Input Signal Playable 3D video format Frequency (kHz) (Hz) 54.00 F/P, L/A 67.50 1080p 27.00 S/S, T&B, S/S Full 33.75...
- Page 36 SPECIFICATIONS 3D supported mode manually Input Signal Playable 3D video format ATV (CVBS) 2D to 3D, S/S, T&B Component 2D to 3D, S/S, T&B, C/B, R/I, C/I 1080p (60Hz : F/S) HDMI-PC Others 2D to 3D, S/S, T&B Interlace 2D to 3D, S/S, T&B HDMI-DTV 2D to 3D, S/S, T&B, C/B, R/I, C/I Progressive...
-
Page 37: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION Before cleaning, turn the power off and disconnect the power cord and all other cables. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 39: Child Safety
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. - Page 40 LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User The model and serial numbers of the TV are located 1-888-865-3026 USA, Commercial User on the back and one side of the TV. Record them below should you ever need service.
-
Page 41: External Control
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 42: Note
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button... -
Page 43: Image Shown May Differ From Your Tv
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. - Page 44 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
-
Page 45: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 46: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 47 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute ► To control Power Off of the set. on, TV will not display OSD.
- Page 48 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 49 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 50 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 51 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To change 3D mode for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01][Cr]...