Cisco TelePresence MX300 G2 Installing page 3

Installing Cisco TelePresence MX300 G2 - Wheel Base
1
Mounting the wheel base
A
You may place the column on the empty
wheel base box as illustrated. Then it is
easier to enter the screws from below.
78-100145-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
4 × M6x20
Optional
It is possible to replace the wheels with rubber pads.
The rubber pads are kept underneath the wheel base,
and must be moved to their correct position.
M5x8 (Allen key, 3 mm)
1 4 ×
2
3