Viewing The Connection Panel - Samsung HG40EC890 Installation Manual

1
2
3
4
✎
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎
When connecting an external device, match the colour of the connection terminal to the cable.
AV IN
1
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an
A/V device.
– Connects Component video / audio.
– Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
– When connecting to
cable (Yellow).
USB (5V 0.5A)
2
USB (HDD/1.0A) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
HDMI IN 1, 2(DVI),
3
✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎ Use the HDMI IN 2(DVI)
adapter (DVI to HDMI) for the video connection and the
ANT IN (SATELLITE), (AIR/CABLE)
4
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
6
English
[HC890-EU]Install Guide-X0ENG.indd 6

Viewing the Connection Panel

3
5
6
7
8
IN, the color of the
AV AV IN [Y/VIDEO]
3(ARC): Connects to the HDMI jack of a device with an HDMI output.
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
# @
9
jack (Green) does not match the color of the video
PC/DVI AUDIO IN jacks for audio.
!
0
2014-05-22 4:37:08