Mounting Brackets - HP 5500 EI Series Installation Manual

Mounting brackets

Figure 2 Front mounting bracket
(1) Hole for attaching to a rack (by using an M6 screw)
(2) Hole for attaching to the switch chassis
Figure 3 Rear mounting bracket
(1) Hole for attaching to a rack (by using an M6 screw)
NOTE:
The M6 screws for attaching the brackets to a rack are user supplied.
Table 4 shows the mounting bracket shipment for different switch models.
Table 4 Mounting bracket kit shipped with the 5500 EI and 5500 SI switches
Chassis
5500-24G EI (2 slots)
5500-24G EI TAA (2 slots)
5500-48G EI (2 slots)
5500-48G EI TAA (2 slots)
5500-24G SI (2 slots)
5500-48G SI (2 slots)
Front mounting brackets
One pair
6
Rear mounting brackets
N/A