Cleaning The Pyrolytic Oven Door - Electrolux EOEM61CS User Manual

28 pyrolytic cleaning of the oven cavity (EPEE63CS & EPEE63CK models only) electrolux e:line ovens
Pyrolytic cleaning of the oven cavity
(EPEE63CS & EPEE63CK models only)
Operation
If your oven has the Pyro self-cleaning function, it cleans
by burning off the spatters and accumulated dirt and
grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out
of the oven cavity.
caution
During the pyrolytic cleaning process the oven becomes
very hot (approximately 500˚C).
• Please keep small children at a safe distance
• During pyrolytic cleaning the air outlet vent above the
door must be kept clear of any obstruction (eg bulky
tea towels).
• It is recommended you clean your oven regularly to
keep the oven in its best condition.
• Do not use your oven to clean miscellaneous items
(eg cookware).
Before carrying out the Pyro function,
All accessories must be removed from the oven.
This includes shelves, trays and side racks.
Clean large pieces of dirt or grease from the oven liner.
Note:
• A s an added safety feature the Pyro cycle will not start
if you have left the right hand telescopic side rack in.
A switch detects the presence of the rack and will not
allow Pyro to start until it is removed.
There are 3 Pyro cleaning cycles you can use.
Soiling Duration
Light Clean 2hrs 00min
Medium clean 2hrs 30min
Heavy clean 3hrs 00min
Duration includes heat-up time and cool-down time of 45
mins
• Light clean
This is an energy saving cycle that can be used on a
regular basis if your oven is lightly soiled. Possibly after
every 2nd or 3rd time you roast meat.
• Medium clean
Use this as your regular cycle about once every
2-3 months to remove mildly dirty ovens.
• Heavy clean
When your oven is very dirty it may need a longer cycle
to clean it thoroughly. This cycle will clean the dirtiest
of ovens.
Selecting the Pyro clean function
Select Pyro clean by using the function button.
PYRO CLEAN
pyro accept
Selecting the required cleaning cycle
Select Light, Medium or Heavy depending on the soiling of
the oven. This is done by pushing the cook time button to
the appropriate time.
PYRO CLEAN
Medium clean 2
pyro accept
Selecting Pyro accept
After selecting the required cleaning cycle, push the Pyro
accept button and the function will then start automatically.
The oven light will then go out and the Pyro function
will start.
PYRO CLEAN
Medium clean 2
pyro accept
tips and information
During Pyro cleaning the door will automatically lock when
the temperature in the oven approaches 300˚C. (A lock
symbol will appear on the display.)
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door. This will only happen when safe temperatures
are reached.
Note:
• T he cooling fan will operate at an increased speed for
Pyro cleaning and will continue to run until the oven has
cooled down. This is normal.
After Pyro cleaning
After cool-down you can wipe the ash out of the oven
with a soft damp cloth and warm water.
To restore the enamel shine to more difficult areas,
use a damp cloth with vinegar and detergent.
cleaning the pyrolytic oven door (EPEE63CS & EPEE63CK models only) electrolux e:line ovens 29

Cleaning the pyrolytic oven door

(EPEE63CS & EPEE63CK models only)
Your pyrolytic oven is equipped with an oven door that can
be disassembled in order to clean all the panes of glass.
Positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
• Open the oven door fully and flip out the hinge locating
tab to the open position.
• After the locating tab has been positioned, gently close
the oven door until it stops on the locating tab. The door
is now ready for dismantling.
Removing the top door trim
• Push in the 2 buttons on either side of the trim.
• Lift the trim away from the door.
Removing the glass panes
• Remove the 3 panes of glass starting with pane 1.
• When removing pane 3 ensure that the 2 rubber
supports are removed before cleaning.
Do not misplace them!
Cleaning the glass panes
Clean with a damp cloth.
Do not use scouring agents or abrasive sponges as these
could damage the reflective surface.
Dry thoroughly before reassembly.
Replacing the glass panes
• Replace the glass panes back into the door starting with
pane 3.
• Ensure this pane is placed into the correct slot and that
the 2 rubber supports are in place.
• Next replace pane 2. There is a reflective coating on
this pane. This coating is indicated by a circle printed on
its surface. Ensure this circle is in the same corner as
pictured below.
Circle in this corner
• Replace pane 1 ensuring the black screening is facing
inwards towards the oven.
Replacing the top door trim
Replace the trim ensuring the clips snap into the 2 location
holes. Flip the hinge locating tab back into its original
position and close the door.
When the pyrolytic cleaning function is on, it is advisable
not to use a cooktop if it is fitted above the oven. This could
cause overheating and damage to both appliances.