Device Name - Panasonic HC-V550 Operating Instructions Manual

[Device Name]

You can view and change this unit's Device name (SSID), which is used for operating this unit as a
wireless access point.
1 Touch [INPUT], and enter the desired Device name (SSID).
≥ Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used.
≥ For details on how to enter characters, refer to page 88.
2 Touch [EXIT].
≥ If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID).
≥ The Password entered during the setting of direct connection cannot be changed.
[Wireless LAN setup]
You can change or check your wireless LAN's network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]
≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
≥ [MAC Address] cannot be changed.
[Connection Test]
You can test the connection between this unit and the wireless access point. The following
connections can be verified:
j Connection to the wireless access point
j Connection to "LUMIX CLUB"
j Connection to USTREAM
j Connection to the home monitor server
1 Touch [NEXT].
≥ The connection test starts.
2 Check the connection test result, and touch [EXIT].
≥ If the connection is successful, "±" is displayed. If the connection is not successful, "t" is
displayed.
≥ To test the connection to "LUMIX CLUB" or USTREAM, you need to make other settings in
advance. (l 151, 171)
(l
- 170 -
(l 163)
163)
(l 163)