Connect Wires - Philips CEM2090 User Manual

Connect wires

Caution
•
Ensure that all loose leads are insulated with electrical
tape.
Note
•
Consult a professional to connect CEM2090 as
instructed below.
1
Connect the supplied male connector to
the unit.
2
Check the car's wiring carefully and
connect them to the the supplied male
connector.
Note
•
Risk of danger! Please consult a professional to perform
the below steps!
1 Green/black Left speaker (Rear)
strip
2 White/black Left speaker (Front)
strip
3 Gray/black Right speaker (Front)
strip
4 Purple/black Right speaker (Rear)
strip
e Red Ignition key +12V DC when
ON/ACC
f Blue Motor/electric antenna relay
control lead
g Blue/white Amplifier relay control lead
h Black Ground
i Yellow To the +12V car battery
which is energized at all
times
3
Connect the antenna and amplifier as
illustrated, if applicable.
Connector
1 ANTENNA
2 REAR LINE OUT R
(Socket)
3 REAR LINE OUT L
(Socket)
Connect to
Antenna
Rear right speaker
Rear left speaker
EN 7