Backlight - Samsung SDZ-375 User Manual

Operating Your Camera
✽ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Sel ect this when the color temperature is between 1800ºK and
10500ºK
INDOOR : Select this when the color temperature is between 4500ºK and 8500ºK.
OUTDOOR : Sel ect this when the color temperature is between 1800ºK and
10500ºK. (sodium light inclusion)
AWC →SET : To f ind the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press the
SET button. If the environment changes,
readjust it.
MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by
using the ATW or AWC mode. After
that switch to MANUAL mode, fine-
tune the White Balance and then press
the SET button.
Notes
• W hite Balance may not work properly under the following conditions. In this case select
the AWC mode.
When the color temperature of environment surrounding the subject is out of the control
1
range
When the ambient illumination of the subject is dim.
2
If the camera is directed towards a fluorescent light or is installed in a place where
3
illumination changes dramatically, the White Balance operation may become unstable.

BACKLIGHT

This camera is designed so that it delivers a distinctive subject and background at
The same time, even when the subject is in backlight, unlike conventional cameras,
By adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Up
and Down buttons so that the arrow indicates 'BACKLIGHT'.
COLOR CCD CAMERA
WHITE BAL MANUAL SETUP
RED 117
|
||||||| ||||||||||||||||||
BLUE 93
|
||||| ||||||||||||||||||||
▶END
Press SET to Return
16
User Guide
MAIN SETUP
WHITE BAL
BACKLIGHT
MOTION DET
2. Select a desired mode using the Left and Right buttons depending on the camera pupose.
WDR : Wh en there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
WDR
BLC : En ables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC(High Light Compensation) : If the scene contains extremely bright light areas
such as; from car headlight, the light can mask out
much of the on-screen detail.
OFF : Deactivates the BACKLIGHT function.
3. Select a desired mode using the Left and Right
button and press the SET button.
• Select 'WDR' to adjust the WDR LIMIT and LEVEL.
- LIMIT : Adjust the WDR Sensitivity by selecting
LOW, MEDIUM or HIGH.
- LEVEL : Adjust the WDR Brightness by controlling
1~100.
COLOR CCD CAMERA
ATW
OFF
OFF
OFF
WDR SETUP
MEDIUM
▶LIMIT
LEVEL 50
|
|||||||||||| |||||||||||||
END
17
User Guide