Initiating A Call Alert (Page) - Motorola MTX-800 Classic User Manual

Initiating a Call Alert (Page)

1. Press the button on the
keypad for one second to enter a
Call Alert mode.
2. Enter the six-digit radio ID of the
radio you are calling.
3. Press and release the PTT.
If the radio you are calling is
turned on, you will hear the Call Alert
acknowledgement of one "beep,"
followed by four "beep" tones.
One "beep" tone indicates that
the radio you are calling is turned off.
Upon a successful Call Alert, the
radio will automatically exit Call Alert
encode mode and return to dispatch.
4. To exit Call Alert encode mode
when the target is not available,
again press and hold
second.
Note: If the radio remains in the Call Alert mode for over six seconds
with no keypad or PTT activity, the radio will make the illegal mode
tone. Press the PTT to resend the Call Alert, enter a new ID, or exit Call
Alert encode mode by pressing and holding the
second.
The radio will store the last ID entered via the keypad, or the ID of
the last unit that call alerted or private called it. To quickly Call Alert the
last unit, eliminate step 2 from the above procedure. This ID will be lost
when power is turned off or the system is changed.
24
1 2
4 5
7 8
0
for one
key for one
3
6
9