Ec-Declaration Of Conformity; Cutting Equipment; Recommended Cable Dimensions - Husqvarna K 3000 Vac Operator's Manual

Cutting equipment

Cutting blade, mm/inches
Max. peripheral speed, m/s
Max. blade speed, rpm
Max. cutting depth, mm (inch)
Max. cutting depth with the Vac attachment, mm (inch)

Recommended cable dimensions

Cable area
Input voltage 100-120 V
Input voltage 220-240 V

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the power
cutter Husqvarna K 3000 Wet, K 3000 Vac dating from 2010 serial numbers and onwards (the year is clearly stated on
the rating plate, followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equipment" 2006/95/EC.
The following standards have been applied: EN ISO 12100:2010, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-
3-2:2006, EN 61000-3-3/A1/A2:2005, EN 60745-1:2009, IEC 60745-2-22:2009.
Gothenburg December 29, 2010
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
24 – English
TECHNICAL DATA
350/14
80
3900
125 (4 59/64)
119 (4 11/16)
2
1,5 mm
20 m
30 m
2
2,5 mm
40 m
50 m