Table of Contents
Advertisement
3
Important information
In this chapter you will find essential information regarding safety when working
on your server.
3.1
Information for ensuring electromagnetic
compatibility
All data and signal cables must have sufficient shielding
The LAN cabling must be conform with the requirements EN 50173 and EN
50174-1/2.
Use of unshielded or badly shielded cables may led to increased emission
of interference and/ore reduced faulty-tolerance of the device
3.2
Safety instructions
I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations".
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
V
CAUTION!
The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install
the server including hardware and software.
Repairs to the device that do not relate to CSS failures shall be
performed by service personnel. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
CX122 S1
Operating Manual
17
Advertisement
Table of Contents
