Safety; Chapter 3 Installing The Cisco Sf 3504 Server Switch - Cisco SFS 3504 Hardware Installation Manual

Safety

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
This product requires short-circuit (overcurrent) protection, to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Warning Use of controls, adjustments, or performing procedures other than those specified may result in
hazardous radiation exposure. Statement 1057
Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
3-2
Chapter 3 Installing the Cisco SFS 3504 Server Switch
OL-14325-01