Channel Aftertouch; Pitch Bend Change - Casio PX-150 Manual

:
Note1 Selecting the algorithms below add Part Volume and Part Pan to the above items.
ID DSP Algorithm
0000 Rotary
0001 Drive Rotary
2002 Compressor
2003 Limitter
After the same DSP line is assigned to different parts as described here, Reverb Send, Chorus Send, and
all DSP parameter settings are common to all parts. Note that changing the settings on any part will
also affect all of the other parts that are sharing the DSP line. To assign the parts to a different DSP
line, you need to change one of the parameters listed above before selecting the tone.
11

Channel Aftertouch

Format
Message Format:
n :
vv:
Send This message is not sent by this Instrument.
Receive Receipt of this message adds modulation to the voice that is sounding. The modulation effect
differs according to the tone being used.
12

Pitch Bend Change

Format
Message Format:
n:
ll:
mm:
Send Sent when the bend wheel is operated.(PX-350M)
Receive Receipt of this message changes the pitch of the currently sounding voice. Pitch bend change
sensitivity depends on the pitch bend sensitivity configured with RPN.
DnH vvH
MIDI Channel Number
Value
EnH llH mmH
MIDI Channel Number
Value LSB
Value MSB
24