Using The Remote; Changing Button Assignments - Sony HT-SF2300 Operating Instructions Manual

Using the Remote
Categories and the
corresponding buttons
DVD recorder 4
(command mode DVD3)b)
DVD player/DVD recorder 3
(command mode DVDl)b)
VCR (command mode 2
VTR 2)a)
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO I jacks on the receiver,
you can set the VIDEO 1 button on this remote
to control the DVD recorder.
Categories
VCR (command mode
VTR 3?)
Press
CD player
5
Euro Digital Satellite
6
Receiver
DVR (Digital CATV 7
terminal)
a)Sony VCRs are operated with a VTR 2 or VTR 3
setting which correspond to 8 mm and VHS
respectively.
blS
ony DVD recorders are operated with a DVD I or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
c)For details on the BD I or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
-
~
C' D
:IJ
C' D
3
o
CD
C
en
:::s
CQ
•
8
9
0/10
e(RM-
AAU022 only)
-/-- (RM-
AAU023 only)
ENTER/
MEMORY
DSS (Digital Satellite
Receiver)
Blu-ray disc player
(command mode BDI)c)
Blu-ray disc recorder
(command mode BD3)c)
Not assigned
TV
1
Hold down the input button of
which you want to change the
assignment.
Example: Hold down VIDEO 1.
2
Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 4.
Now you can use the VIDEO I button to
control the DVD recorder.
To clear all remote button
assignments
Press
I/C),
DMPORT and MASTER VOL - at
the same time.
The remote is reset to its factory settings.
63
GB