Related Manuals for Miele Coffee System
Summary of Contents for Miele Coffee System
- Page 1 Operating and Installation Instructions Coffee System To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr. 09 741 610...
-
Page 2: Table Of Contents
Guide to the coffee system ........ - Page 3 Info (displaying information) ......... 45 Locking the coffee system (System lock 0) ......45 Water hardness .
- Page 4 Contents Cleaning and care ..........48 Overview .
-
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Children in the household Please read these instructions carefully to prevent accidents and The coffee and hot water machine damage. -
Page 6: Technical Safety
The coffee machine must not be A damaged coffee system can be used in mobile installations such as dangerous. Before installing the coffee boats. machine, check for externally visible Only use the coffee machine in damage. -
Page 7: Proper Use
Be careful when damaged in any manner. Contact emptying it. Miele. Always attach the cord to the Please note: appliance first, then plug it into the wall – Keep away from the areas under the outlet. - Page 8 – Do not use water from reverse osmosis units. The machine could be – Clean the coffee system and milk damaged. container daily (see "Cleaning and care"). Fill the bean container only with roasted whole coffee beans.
-
Page 9: Save These Instructions
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel trim: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the surface of the trim. These damage the surface, causing it to lose its dirt repellent protective coating. -
Page 10: Guide To The Coffee System
Guide to the coffee system Front view a On/Off K sensor b Touch display c "Back" sensor d Door handle e Hot water dispenser f Drip tray g Main dispenser, with automatic height-adjustment and lighting h Milk container with lid... - Page 11 Guide to the coffee system Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Grind control slide m Coffee bean container n Water container o Drip tray p Waste unitr q Drip catcher r Main dispenser connector...
-
Page 12: Accessories
Accessories Included accessories Optional accessories – Coffee scoop Miele offers a range of useful for measuring ground coffee accessories, as well as cleaning and conditioning products for your coffee – Milk container with lid machine. for storing and preparing milk –... -
Page 13: Operation
Operation Touch display The coffee system is operated by a finger touch. If your fingers are cold, the touch display may not react to your finger contact . Do not use pointed or sharp objects, e.g. pens, to operate the touch display. - Page 14 Operation Using the touch display Each finger touch of an available option changes the respective field to orange. Selecting or calling up a menu ^ Touch the respective field once. Scrolling ^ Swipe the screen, i.e. place your finger on the touch display and swipe it in the desired direction.
- Page 15 Operation The numerical keypad appears. ^ Touch the desired numbers. When you enter a valid number, the "OK" field will go green. ^ Touch "OK". Entering letters Profile names or the names for your own drinks are entered using a keyboard. ^ Touch the desired letters or characters.
- Page 16 The timer is activated for "Turn on at" (see "Settings – Timer"). The symbol and the desired turning-on time appear in the display 23:59 hours before the coffee system is due to turn on, as long as "On" or "Night dimming" is selected for the time display.
-
Page 17: First Steps To Use
^ Repeat this for "Minutes" until the – Display (time of day) current time of day is set. ^ Touch the On/Off button K. ^ Touch "OK". The display briefly shows the "Miele - The setting is now saved. Welcome" message. -
Page 18: Water Hardness
First steps to use Water hardness Display You can choose from the following Water hardness is an indication of the options: amount of minerals dissolved in water. The higher the mineral content, the – On: The display will always show the harder the water. - Page 19 Then shake off any excess water. The result will be visible after about one minute. You can now set the water hardness level for the coffee system. Setting the water hardness ^ Touch "Settings" %. ^ Swipe the display until "Water hardness"...
-
Page 20: Filling The Water Tank
Filling the water tank Change the water daily to prevent bacteria growth. Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Only fill the water tank with cold, fresh tap water. ^ Open the appliance door. -
Page 21: Filling The Coffee Bean Container
^ Slide the cover all the way forward again. Caramelized or otherwise pre-treated beans or sugar ^ Slide the bean container back into containing beverages must not be the coffee machine. filled into the appliance. It will ^ Close the door. damage the coffee system. -
Page 22: Turning The Coffee Machine On And Off
Turning the coffee machine on and off Turning on Turning off for longer periods of time When the machine is turned on, it heats up and rinses out the pipework. This If you will not be using the coffee cleans and heats the pipework to ready machine for a while: the machine for coffee preparation. -
Page 23: Dispenser Adjustment
^ Touch "Main menu" or the Back sensor. The coffee system senses the height of the cup or glass being used. When a ^ Touch "Settings" %. drink has been selected, the main ^ Swipe the display until "Dispenser dispenser automatically moves to the adjustment"... -
Page 24: Preparing Beverages
Preparing beverages Espresso, Coffee or Lungo Preparing two portions coffee You can request two portions of espresso or coffee at once in one cup From the "Drinks" menu: or in two separate cups simultaneously. From the "Drinks" menu: To fill two cups at the same time: ^ Place a cup under the main dispenser. -
Page 25: Canceling Preparation
You can use the "Coffee pot" function To cancel preparation, twice in succession. After that, the ^ Touch "Stop". coffee system will need to cool down for an hour to prevent damage to the appliance. ^ Touch "Cancel". Preparing coffee drinks from... - Page 26 Preparing beverages Adding ground coffee Preparing coffee drinks from ground coffee Use the scoop supplied with the system to ensure the correct amount of ground If you want to use ground coffee: coffee is used. ^ Touch "Yes". Do not add more than one level You can now select which coffee drink scoop of ground coffee to the coffee you want prepared from the ground...
-
Page 27: Beverages With Milk
Preparing beverages Beverages with milk You can prepare various specialty coffee beverages with milk or Hot milk and Milk froth. The following specialty coffee options are available: Cappuccino H consists of about two-thirds milk froth and one-third espresso. Latte macchiato k consists of one-third a Lid each of hot milk, milk froth and b Sensor rod... -
Page 28: Preparing Hot Water
Even if you do not confirm with "OK", dispenser. the coffee machine will automatically rinse the milk pipework after a while. To cancel preparation: ^ Touch "Cancel" or "Stop". The coffee system cancels the preparation. -
Page 29: Customizing Your Coffee
– change the brewing temperature, or Grind the beans again before – turn on the "Pre-brewing" option. adjusting another notch. ^ Open the front of the coffee system. Grinder setting You can change the grinder setting to suit the type of coffee you are using. -
Page 30: Changing The Drink Parameters
– the altitude of the region. Amount of ground coffee There are five brewing temperatures. The coffee system can grind and brew Tip: Not every coffee can tolerate high 6-14 g of coffee per cup. The greater temperatures. Certain types are too... -
Page 31: Pre-Brewing Ground Coffee
Customizing your coffee Pre-brewing ground coffee When the pre-brewing function is turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. -
Page 32: Setting The Serving Size
^ Touch the ingredients for which you water tank during preparation, the want to program the portion size. coffee system will stop the portion The selected ingredients have a check programming. The portion will not be mark 9 beside them. - Page 33 Setting the serving size The coffee system will now start preparing your drink. Portion sizes can be set for each selected ingredient when "Save" is displayed. ^ Touch "Save" when the correct amount of the particular ingredient has been dispensed.
-
Page 34: Resetting Drinks
Resetting drinks You can reset the portion sizes and parameters for all drinks back to their factory default setting. From the "Drinks" menu: ^ Touch "Edit". ^ Touch "Reset drinks". "Reset all drinks to default?" appears in the display. ^ Touch "Yes". -
Page 35: Profiles
Profiles Creating a user profile If the coffee system is used by several people with different coffee ^ Touch "Create profile". preferences, you can create individual user profiles. You can choose the The editor will open in the display. serving size of each coffee beverage ^ Enter the desired name and touch for each profile (see "Setting the serving... -
Page 36: Changing A Profile
Changing a profile You can customize the system so that after preparing each beverage it automatically reverts to the standard Miele profile or retains the most recently selected custom profile. ^ Touch "Edit". ^ Touch "Change profile". You can now choose between: –... -
Page 37: Editing Drinks For A Profile
Editing drinks for a profile ^ Enter a name for the newly created You can create your own beverages for each profile and set the portion size and drink (maximum of 8 characters) and parameters, e.g. amount of coffee, touch "Save". brewing temperature, for each beverage The newly created drink will appear in individually. -
Page 38: Mymiele
(see "Settings - and confirm with "OK". Starting screen"). This screen is The entry is deleted. displayed each time you turn your coffee system on. Sorting entries Accessing MyMiele Š ^ Touch "Edit". ^ Touch "Sort entries". -
Page 39: Settings
Settings Changing and saving settings The "Settings" menu allows you to customize the coffee system for your ^ Touch "Main menu" or the "Back" personal needs. sensor. ^ Touch "Settings" % . Accessing the "Settings" menu ^ Swipe the display until the setting you want appears and then touch it. -
Page 40: Overview Of The Setting Options
Settings Overview of the Setting options The factory default for each setting is displayed in bold. Option Available settings Language German, English, other languages Country Time Display Off / On / Night dimming Clock type Analog /Digital Time format 12 h / 24 h Date Timer Timer 1... - Page 41 Settings Option Available settings Water hardness Soft 1 Medium 2 Hard 3 Very hard 4 Brightness Volume Audio signals Keypad tone Warming drawer On / Off / Automatic Dispenser adjustment On / Off Showroom program Demo mode (On / Off) Factory default settings Settings MyMiele...
-
Page 42: Language
– 24-hour clock (24 hr) – 12-hour clock (12 hr) Your selection affects the energy consumption of the coffee system. Time of day This is indicated by a message on the display. You set the hours and minutes. -
Page 43: Timers
Turn on at There are two timers with the following If you have activated the system lock, functions: the coffee system will not turn on at the specified time. The coffee system – turns on at a particular time, e.g. in If the coffee system has turned itself on the morning for breakfast ("Turn on... -
Page 44: Eco Mode
Settings Eco mode Assigning week days Select the day of the week you want. The eco mode is a power-saving mode. The selected weekday is marked as 9. The steam system will only heat up once a coffee beverage or steam for When all desired weekdays are hot milk and milk froth is requested. -
Page 45: Lighting
Locking the coffee system – Appliance turned on (System lock 0) – Appliance turned off You can lock the coffee system to prevent it being used without your Setting the time the lighting turns off knowledge, by children, for example. -
Page 46: Water Hardness
("Turn on at" timer function), the warming drawer turns on Brightness approximately 30 minutes before the coffee system is due to turn on. So You can set the brightness of the your cups are warm and ready for display in the bar chart. -
Page 47: Factory Default Settings
Do not activate this setting for system was delivered. domestic use. Please refer to the "Overview of the The coffee system can be presented in setting options" chart for the default "Demo mode" for showrooms or factory settings. exhibitions. In this mode the system... -
Page 48: Cleaning And Care
Cleaning and care Overview The coffee system must be cleaned regularly to prevent a build-up of bacteria. Recommended frequency To be cleaned / maintained Daily Milk container and lid (at the end of the day) Water container Waste unit Drip tray and no-spill grid... - Page 49 Cleaning and care Danger of burns! All surfaces are susceptible to Let the unit cool down before you scratching. On glass surfaces, clean it, especially the water in the scratches can lead to breakage. drip tray. All surfaces can become discolored if they are cleaned with unsuitable Do NOT use a steam cleaner to products.
-
Page 50: Rinsing The System
Milk residue can clog the milk ^ Touch "Maintenance" y. pipework. If you have prepared a drink ^ Touch "Rinse the appliance". with milk, the coffee system will automatically rinse the milk pipework The pipework will now be rinsed. The after a few minutes. -
Page 51: Cleaning The Milk Pipework Using The Milk Line Cleaner
When the display shows "Fill water The milk pipework must be cleaned container with cleaning agent and about once a week. The coffee system lukewarm water up to the 8 symbol will remind you at the correct time. and replace", do the following: "Clean the milk pipework in 3 days"... -
Page 52: Milk Container With Lid
Cleaning and care Milk container with lid Ensure that the neck and lip of the container are kept clean (both when filling and when moving the container). Contamination can cause the system to malfunction. ^ The milk container (glass) can be cleaned in the dishwasher or by hand with warm water and liquid dish soap. -
Page 53: Main Dispenser
Cleaning and care Main dispenser Clean the cover of the main dispenser by hand only, using warm water and liquid dishsoap. All other components are dishwasher safe. The main dispenser must be in the maintenance position for cleaning. Otherwise you will not be able to remove the parts. - Page 54 Cleaning and care ^ Turn the top connecting piece a and ^ Now reassemble the dispensing unit pull it up and off. Then pull the in the reverse order. Make sure that bottom connecting piece b up and the upper connecting piece a clicks off.
-
Page 55: Cleaning The Milk Valve
Important! Before you confirm "Leave maintenance position" with "OK", you must remove the cleaning brush. Otherwise, the coffee system will be damaged. ^ To remove, press and hold the sensor cover between the dispenser nozzles a. Then press the main dispenser in from the sides at the back b. -
Page 56: Water Tank
Cleaning and care Water tank Waste unit Change the water every day to prevent After a certain time, the coffee system a build-up of bacteria. displays a message indicating that the waste unit needs to be emptied. At this Make sure that the valve, the point the container must be cleaned. -
Page 57: Drip Tray
^ Push the drip tray back into the Risk of burns! coffee system. If the coffee system has just been rinsed, wait a while before removing Make sure the drip tray is pushed in the drip tray. Rinse water runs out of as far as it will go. -
Page 58: Drip Tray Cover
Cleaning and care Drip tray cover Main dispenser connector ^ Remove the drip tray cover. A connecting piece between the brew unit and the main dispenser is located ^ The drip tray cover can be cleaned in on the inside of the front. the dishwasher or by hand using warm water and liquid dish soap. -
Page 59: Interior And Front Door
Cleaning and care Interior and front door Brew unit ^ Clean the interior and the front door Clean the brew unit by hand only with warm water and liquid dish soap using warm water. Do not use once all removable parts have been soap. - Page 60 ^ Dry the funnel to prevent ground coffee from sticking to it the next time coffee is prepared. ^ Clean the inside of the coffee system. Use your vacuum cleaner to remove dry coffee grounds.
-
Page 61: Degreasing The Brew Unit
These cleaning tablets were specially formulated for use in the coffee system. They are available from Miele. After 200 portions, the display will show the message "Degrease brew unit". This message will be displayed until the brew unit has been degreased. -
Page 62: Exterior
^ Use a clean, soft sponge with warm water and liquid dish soap to clean the housing. Dry all parts with a soft cloth. Tip: You can also clean the exterior using the Miele micro fiber cloth. -
Page 63: Descaling
When the number of remaining drinks taste. is 0, the coffee system will lock. The display will read, "Please descale". You can turn the coffee system off if you do not want to run the descaling program at this time. - Page 64 Descaling The descaling program is now complete and drinks can be prepared again. When descaling the system, be sure to wipe off any splatters of descaling agent immediately! These could damage the surfaces. After descaling the system, carefully clean the water tank and the drip tray to remove all traces of descaling agent.
-
Page 65: Frequently Asked Questions
Display messages ^ To address the "fault", follow the instructions on the display. ^ If the fault message still appears on the display, contact Miele Technical Ser- vice. Fault Possible cause and solution Fault 1 - 4 There is an internal malfunction. - Page 66 Close the front door. If you cannot remove the brew unit: ^ Touch the On/Off sensor K to turn off the coffee system. Wait about 2 minutes and then turn the system back on. Fault 227 - 230, The automatic dispenser adjustment is malfunctioning.
- Page 67 ^ Use only cups or glasses that can be recognized by the automatic dispenser adjustment. The automatic dispenser adjustment is malfunctioning. ^ Touch the On/Off sensor K to turn off the coffee system. Wait about 2 minutes and then turn the system back on. "Too much ground There is too much ground coffee in the ground coffee chute.
- Page 68 The sensor There is an internal malfunction. buttons do not ^ Open the front door of the coffee system. respond. The The current process is stopped. coffee system can no longer be ^ Unplug the coffee system.
- Page 69 ^ Adjust this setting (see "Settings – Display brightness"). difficult to read. After the coffee There is limescale build-up in the coffee system. ^ Touch the On/Off sensor K to turn off the coffee system. system has been turned on, the Wait for approx. 1 hour.
- Page 70 The drip tray's sensors are not working properly. though the drip ^ Touch the On/Off sensor K to turn off the coffee system. tray is empty. The metal contacts are dirty. ^ Clean and dry the contacts thoroughly (see "Cleaning and care –...
- Page 71 The automatic dispenser adjustment is malfunctioning. recognized by the ^ Touch the On/Off sensor K to turn off the coffee system. automatic Wait about 2 minutes and then turn the system back on. dispenser adjustment. The ^ Use another cup or glass and make a drink.
- Page 72 ^ Fill the coffee bean container with fresh beans. than usual. There might be stones mixed in with the coffee beans. ^ Turn the coffee system off immediately. Contact Miele Technical Service. Espresso or coffee The grind level is too coarse.
- Page 73 Frequently asked questions Problem Possible cause and solution There is no proper The grind level is too coarse or too fine. crema on the ^ Set the grinder control to a coarser or finer setting (see coffee or "Adjusting the grinder setting"). espresso.
-
Page 74: Cleaning Clogged Milk Pipework
Cleaning clogged milk pipework Step 1: Cleaning the milk If the quality of the milk froth is unsatisfactory, the air intake hose may pipework in the lid of the milk be clogged. Follow the instructions in container "Step 2: Cleaning the air intake hose and angled section in the door."... - Page 75 Cleaning clogged milk pipework To reassemble the lid: ^ First put the seal in the lid. Then insert the milk intake pipe into the seal. Make sure not to slide the beveled end of the milk intake hose into the seal.
- Page 76 Important! Before you confirm "Leave maintenance position" with ^ Touch "OK". "OK", you must remove the cleaning The milk valve will move into the stan- brush. Otherwise, the coffee system dard position and the milk pipework is will be damaged. rinsed.
-
Page 77: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 79: Installation Instructions
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. -
Page 80: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling authority about the be biodegradable and recyclable. -
Page 81: Electrical Connection
GROUNDED performing maintenance or repairs. Important All electrical work should be The coffee system comes equipped performed by a qualified electrician with a 6 ft (1.8 m) power cord with a in strict accordance with national NEMA 5-15P molded plug for and local safety regulations. -
Page 82: Installation
Installation Installation and combination options The system is designed to be built into cabinetry. - Page 83 Installation It is also possible to combine it with other built-in Miele appliances. If the coffee system is to be built in above another appliance, there must be a full-width, closed shelf between them (exception: installation with a warming drawer).
-
Page 84: Ventilation
You will need two Allen wrenches Otherwise condensation can form, size 3 and 5 for the installation. causing damage to the coffee system or the surrounding cabinets. To align the appliance door flush with the kitchen cabinetry, there must be a sealing strip around the installation recess;... - Page 85 The feet can be unscrewed by up to 3/8" (10 mm). ^ Connect the system to the electricity supply. ^ Insert the coffee system all the way into the installation recess. When inserting the system into the recess, make sure the electrical connection is not damaged.
-
Page 86: Adjusting The Door Hinges
Installation Adjusting the door hinges If the door cannot be opened or closed easily after installation, you will have to align the door (TX 20): ^ To adjust the door flush with the front of the cabinet, turn screw a. ^ To adjust the door horizontally and vertically, turn screw b. -
Page 87: Remotevision (Optional Accessory)
'virtual link' between your following requirements appliance and our monitoring center. If – A wireless router that supports an a fault occurs, Miele's client service IEEE 802.11b/g protocol center will be notified and contact you, ® or another trusted individual identified –... -
Page 88: Copyright And Licenses
Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are registered trademarks of Adobe Systems Incorporated. The proprietary rights of Miele and other relevant software suppliers (e.g. Adobe) must be respected. Miele and its suppliers reserve all rights to the software components. -
Page 91: Adresses
Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive 800-843-7231 Phone: Vaughan, ON L4K 4V8 609-419-9898 www.miele.ca 609-419-4298... - Page 92 CVA 6800 en - US, CA M.-Nr. 09 741 610 / 02...