Selecting A Sound Field Program - Yamaha HTR-5635 Owner's Manual

BASIC PLAYBACK

Selecting a sound field program

You can enhance your listening experience by selecting a
DSP program. For details about each program, see pages
29 to 33.
NATURAL SOUND AV RECEIVER
STANDBY
/ON
SILENT
STEREO PROGRAM MEMORY
EFFECT MAN'L/AUTO FM
PHONES
PROGRAM l / h
HALL
1
TV SPORTS
1,2
5
/DTS
9
LEVEL
TITLE
–
TEST
RETURN
1
Press one of the DSP program buttons on
the remote control to select the desired
program.
The name of the selected program appears on the
front panel display.
HALL JAZZ
1
TV SPORTS MONO MOVIE
5
/DTS - SELECT
9
Program name
VCR V-AUX
MOVIE THTR 1
PRO LOGIC /
D G T L S p e c t a c l e
DSP
26
INPUT VOLUME
INPUT M0DE
BASS TREBLE
TUNING MODE FM/AM PRESET/TUNING PRESET/TUNING A/B/C/D/E
AUTO/MAN'L MONO EDIT
– + –
MUTE
JAZZ ROCK ENTERTAINMENT
2 3 4
MONO MOVIE 1 - MOVIE THTR - 2
6 7 8
STEREO
- SELECT MATRIX 6.1
0 +10 ENTER
SET MENU
MENU
A/B/C/D/E
+
SELECT
DISPLAY
PRESET/CH
ROCK ENTERTAINMENT
2 3 4
1 - MOVIE THTR - 2
6 7 8
MATRIX 6.1 STEREO
0 +10 ENTER
D-TV/CBL DVD MD/CD-R TUNER CD
VOLUME
L
LFE RL
Sub-program name
2
After selecting the desired program, press
the same button repeatedly to select the
desired sub-program if available.
Example: Pressing MOVIE THEATER 1 repeatedly
switches the sub-program between
"Sci-Fi" and "Spectacle".
6CH INPUT
+
Program name
PRO LOGIC /
D G T L
DSP
Notes
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• The digital sound field processor cannot be used when a
source connected to the 6CH INPUT jacks of this unit is
selected or when 96-kHz sampling digital signals are input to
this unit.
• The acoustics of your listening room affect the DSP program.
Minimize the sound reflections in your room to maximize the
effect created by the program.
• When you select an input source, this unit automatically
selects the last DSP program used with that source.
• When you set this unit in the standby mode, the current source
and DSP program are memorized and are automatically
selected when you turn on the power again.
• If a Dolby Digital or DTS signal is input when the input mode
is set to AUTO, the DSP program (No. 7–9) automatically
C R
RR
switches to the appropriate decoding program.
• When a monaural source is being played with PRO LOGIC/
Normal or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound will be heard from the main speakers and the rear
speakers. Sound can only be heard from the center speaker. (If
"1A CENTER" on the SET MENU is set to NON, the center
channel sound is output from the main speakers.)
y
• You can also select DSP program by pressing PROGRAM
l / h on the front panel.
• Select a program based on your listening preference. Program
names are just for reference.
HALL JAZZ ROCK ENTERTAINMENT
1 2 3 4
TV SPORTS MONO MOVIE 1 - MOVIE THTR - 2
5 6 7 8
/DTS - SELECT MATRIX 6.1 STEREO
9 0 +10 ENTER
VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER
MOVIE THTR 1
z S c i - F i
Sub-program name
CD
VOLUME
L C R
LFE RL RR