Operating Features - Kenwood TK-860G Service Manual

1. Controls and Functions
1-1. TK-860G Front Panel
1 2 3
6
1-2. TK-862G Front Panel
1 2 3
6
1-3. Microphone
8
1
IO (Power) switch
Press to switch the transceiver ON (or OFF).
2 LED indicator
Lights red while transmitting. Lights green while receiv-
ing. Flashes orange while receiving a Code Squelch or
Selective Call code, or a 2-Tone code that matches the
one set up in your transceiver.
3 / keys
These are PF (Programmable Function) keys. Press each
key to activate its auxiliary function. The default settings
are Volume Up and Volume Down.
4
Display
See right.
5
/ keys
These are PF (Programmable Function) keys. Press each
key to activate its auxiliary function. The default settings
are Channel Up and Channel Down.
6 Microphone jack
Insert the microphone plug into this connector.
7 MON, A, D/A, , , and SCN keys (TK-860G)
MON, , , and A keys (TK-862G)
These are PF (Programmable Function) keys. Press each
key to activate its auxiliary function.
8 PTT (Push-to-Talk) switch
Press this switch, then speak into the microphone to call
a station.

OPERATING FEATURES

4 5
7
4 5
7
TK-860G/862G
1-4. Display
TK-860G
Indicator
Appears while using SmarTrunk.
Appears when the selected channel
in busy.
Appears when QT, DQT, DTMF, or
2-Tone decoding is deactivated (by
pressing the Monitor key).
Appears when you receive a Code
Squelch, Selective Call, 2-Tone code.
Also appears when you transmit
using Code Squelch or Selective Call.
Appears while scanning.
Appears when the AUX port is
activated.
Appears when the selected channel
is included in the scanning sequence.
Displays the selected channel
number (or name), DTMF digits
(when entering digits, confirming
digits, or making a call), and mes-
sages received via Selective Call.
TK-862G
Indicator
Appears when QT, DQT, DTMF, or
2-Tone decoding is deactivated (by
pressing the Monitor key).
Appears when the AUX port is
activated.
Displays the selected channel
number.
Description
Description
5