Rules For Safe Operation; Hazard Symbols And The Meanings; Operating Symbols And Their Meanings - Husqvarna 521SSE Operator's Manual

This manual contains safety information to
make you aware of the hazards and risks
associated with snow throwers, and how to avoid them.
The snow thrower is designed and intended for removal
of snow, and should not be used for any other purpose. It
is important that you read and understand these
instructions, and anyone operating the equipment read
and understand these instructions.
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth
defects, or other reproductive harm.
A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol may
be used to represent the type of hazard.
DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided,
might result in minor or moderate injury.
CAUTION, when used without the alert symbol,
indicates a situation that could result in damage to
the equipment.

Hazard Symbols and the meanings

These symbols are used on your equipment and defined in
your operating manual. Review and understand the meanings.
The use of one of these symbols combined with a signal word
will alert you to potential hazards and how to avoid them.
Safety Alert − Identifies safety information about
hazards that can result in personal injury.
Operator's Manual − Read and understand before
performing any activity or running equipment.
Rotating auger
Rotating impeller
Toxic fumes
Rotating gears
Thrown objects
Keep a safe distance
from the equipment.
Shut off engine and remove spark plug connector
before performing maintenance or repair work.
1740274

RULES FOR SAFE OPERATION

WARNING
Fire
Explosion
Shock
Hot Surface
Never reach into
rotating parts.
Recommended ear
protection for
extended use.

Operating Symbols and their meanings

These symbols are used on your equipment and defined in
your operating manual. It is important that you review and
understand the meanings. Failure to understand the
symbols might result in harm to you.
Oil
Fuel
On Off
Primer bulb
Throttle
Choke off
Choke on
Stop
Slow
Fast
Engage
Traction
Auger Collector
Auger Clutch
Drive Clutch
Discharge Chute
LEFT
3
Foward
Neutral
Reverse
Ignition On
Ignition Off
Ignition Key
Push to engage
electric start
Electric
Start
Engine
Start
Engine Run
Engine Off
Engage
Disengage
Chute Deflector
DOWN
RIGHT UP