Maintenance And Cleaning; Filter Cartridge / Door Inner Surface; Sensor (Models Equipped With A Sensor) - Beko DV 6120 X Owner's Manual

5

Maintenance and cleaning

Filter Cartridge / Door Inner Surface

Lint and fibres released from the laundry to the
air during the drying cycle are collected in the
"Filter Cartridge".
C
Such fibre and lint are generally formed
during wearing and washing.
C
Always clean the filter and the inner surfaces
of the cover after each drying process.
C
You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and
open the filter.
3. Clean lint, fibre, and cotton raveling by hand
or with a soft piece of cloth. 4.
filter and place it back into its seat.
C
Clogging may arise on the filter surface
after using your machine for some time; if this
occurs, wash the filter with water and dry it
before using again.
C
Clean the entire inner surface of the cover
and door gasket.
Sensor (models equipped with a
sensor)
There are humidity sensors in your machine that
detect whether the laundry is dry or not.
For sensor cleaning;
1. Open the door of the machine.
2. Allow the machine to cool off if drying has
been carried out.
3. Wipe the metal sensors with a soft cloth,
dampened with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or
substances alike when cleaning as these
might cause fire and explosion!
Close the
14 EN