Maintenance; Engine Oil Changing Instructions - Husqvarna 1335PW Operator's Manual

Observe regular maintenance intervals to ensure
maximum performance and life from the pressure
washer. Refer to the schedule for recommended
maintenance. If you operate the pressure washer in
dusty conditions, perform maintenance checks more
often.

ENGINE OIL CHANGING INSTRUCTIONS

Before tipping the engine or
CAUTION
!
equipment to drain oil, drain fuel
from the fuel tank.
NOTE: Change oil while the engine is cool.
1. Disconnect the spark plug wire from the spark
plug.
2. Locate and remove the engine oil drain plug (see
Figure 18).
3. Drain old oil.
4. Replace the drain plug and set the unit upright.
5. Refill the unit with new oil of a recommended
type and quantity. Fill the unit to the proper
level shown on the dipstick (if provided).
Otherwise, fill the unit to the top of the oil filler
neck.
Engine Oil Type SAE 10W-30
SAE 30W (Above 60 °F/15.7° C)
Engine Oil Capacity
5525PW - Honda GCV160 - 18.6 fl. oz. (0.550 L)
6030PW - Subaru EX17 - 20 fl. oz. (0.591 L)
9030PW - Subaru EX27 - 37 fl. oz. (1.09 L)
1335PW - Honda GX390 - 37 fl. oz. (1.09 L)
16 — English

MAINTENANCE

Model 5525PW - Engine Oil Drain
Plug
Models 1335P, 6026PW, and 9030PW - Engine Oil
Drain Plug
Figure 18