Canon PowerShot A650IS User Manual page 124

1221
Various Shoaling Methods
31
Press the
8
button.
To Cancel the Shortcut Button
Select
!!
in Step
2.
Using the
.Q,N'
Button
1
Press the
.Q,N'
button.
• For
IT]
or
ED,
each time that the
.Q,N'
button is pressed, the
settings are switched.
• For
Iml,
the corresponding setup screen is displayed.
• Each press of the
.Q,N'
button records the white balance data
with the
g
option. Since the frame does not appear at this
point, ensure that the white paper or cloth is positioned so it
appears at the center of the LCD monitor and then press the
.Q,N'
button. After using this function once, the white balance
setting changes to the
g
setting.
• For
fJ,
pressing the
.Q,N'
button turns off the LCD monitor.
The display turns on again with any button operation.
Depending on the shooting mode or settings, this function may
not be available even if the
.Q,N'
button is pressed.
I
Setting the Display Overlays
~
~
See Functions Available in Each Shooting Mode (p. 214).
Shooting Mode
C!lID
'l\
~ ~
fl1
SeN
.,,*'p
Tv Av M
"1 Only [Grid Lines] can be set.
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
Off
Grid Lines Displays grid lines to divide the screen into 9 parts. Helps
confirm the vertical and horizontal positioning of the subject.
Helps confirm the print area for a 3:2 print.·
2
3:2 Guide Areas outside the printable area are grayed out.
Both
Displays both the grid lines and the 3:2 guide
simultaneously.
"2 Images are stili recorded at the standard aspect ratio of 4.3.