Upload Firmware To Rcp; Upload Firmware To Http; Download Configuration - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide

Upload Firmware to RCP

This window allows the user to upload firmware from the Switch to a RCP Server.
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Upload to initiate the upload.

Upload Firmware to HTTP

This window allows the user to upload firmware from the Switch to a HTTP Server.
The fields that can be configured are described below:
Parameter
Unit
Source File
Click Upload to initiate the upload.

Download Configuration

The following window is used to download the configuration file for the Switch.
Figure 12-9 Upload Firmware to RCP window
Description
Enter the RCP Server IP Address used.
Enter the appropriate Username used.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Figure 12-10 Upload Firmware to FTP window
Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the location and name of the Source File.
446