Detaching The Table-Top Stand From The Tv - Sony Bravia KDL-70W850B Operation And Setup Manual

3
Fix the TV to the Table-Top Stand using
the supplied screws. The arrow marks
~
indicate the location of the screw
holes used for securing the Table-Top
Stand.
Jb~--1[
",tl
L~~ux:2J
~~'
,. ,.
p
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
• Alternative (middle position)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
Middle position
1
2
To detach the Table-Top Stand from the TV,
remove the screws
~.
p
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.