D-Link Storage Utility; D-Link Sharecenter Pulse Dns-320 User Manual - D-Link ShareCenter Pulse DNS-320 User Manual

Section 2 - Getting Started
When irst powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does
not receive a DHCP assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to
change the IP address before logging in or are unable to connect to the ShareCenter Pulse IP address, you can use the Storage
Utility provided on the product CD to locate the device on your network and make any needed changes.
work Storage The D-Link Storage Utility displays any ShareCenter Pulse devices it
Device: detects on the network.
Refresh: Click to refresh the device list.
Coniguration: Click Configuration to access the Web-based configuration of the
ShareCenter Pulse.
LAN: Conigure the LAN Settings for the ShareCenter Pulse here.
Apply: Click Apply to save and activate the changes to the LAN Settings.
Drive Mapping: Volumes available for mapping are displayed here.
Available Drive Select an available drive letter. Click Connect to map the selected volume.
Letters: Click Disconnect to disconnect the selected mapped volume.
About: Click About to view the software version of the Easy Search Utility.
Exit: Click Exit to close the utility.

D-Link ShareCenter Pulse DNS-320 User Manual

D-Link Storage Utility

20