Automatic Traffic Information Reception - Yamaha RX-V367 Owenrs Manual

TRANSMIT
RECEIVER
SLEEP
eINFO
2 Press
HDMI
information is displayed.
1 2 3 4
AV
Information on the display changes as you press the
1 2 3 4
AUDIO
key. The kind of information is displayed for a while
5 1 2
and then the information is displayed.
V-AUX
c
TUNER
Program Service
FM AM
PRESET TUNING
e
INFO MEMORY
(Frequency display)
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
STRAIGHT
Audio Decoder
SCENE
BD
TV CD RADIO
DVD
Contents of information are as follows.
SETUP OPTION
l
Type of information
i
ENTER VOLUME
Program Service
RETURN
MUTE
Program Type
Radio Text
Clock Time
DSP Program
Audio Decoder
c
TUNER
e
INFO
i
Cursor B / C
i
ENTER
i
RETURN
l
OPTION
J
1 : "PTY Wait," "RT Wait," or "CT Wait" may appear when Program
Type, Radio Text, or Clock Time is displayed. That shows this
unit is receiving data (or stopping receiving data). If the data is
receivable, the corresponding information is displayed after a
while.
Front panel display (When "Program Type"
repeatedly until the desired
selected)
J1
Program Type Radio Text
Clock Time "Program Service," "Program Type," "Radio Text"
and "Clock Type" do not appear when the radio
DSP Program
station does not provide the Radio Data System
service.
■
Description Automatic traffic information
reception
Displays the name of the Radio Data
System program service currently
When the tuner is active, this unit can automatically
being received.
search for and receive transmissions from traffic
information broadcast stations. To enable this function:
Displays the type of the Radio Data
System program currently being
received.
1
Displays the information on the
Radio Data System program
currently being received.
2
Displays the current time.
Displays the currently selected
sound field program.
Displays the currently selected
surround decoder.
3
J
2 :
Frequency
10800
VOL.
STEREO
TUNED
CLASSICS
L
SL
Program Type
cTUNER
Press to switch to the tuner input.
lOPTION
Press to display the Option
J2
menu.
OPTION
VOL.
Volume Trim
L
SL
iCursor B / C
Use to select
"TrafficProgram."
OPTION
VOL.
TrafficProgram
L
SL
See the Setting the Option menu for Each Input Source section
(☞p. 34) for more information on the Option menu.
PLAYBACK
iENTER
4 Press to enable the search
function.
Status
SW
READY
C
R
SR
TrafficProgram
• The transmission search will begin in approximately
5 seconds. Or, when the status indicator reads
"READY," you can begin the search immediately by
i
pressing ENTER.
i
• By pressing RETURN
right before or during a
search, it will return to the Option menu.
• When the status is "READY," use
start a search in the specified direction.
i
B: Searches upward from the current
Cursor
frequency.
i C: Searches downward from the current
Cursor
frequency.
When a traffic station is found, it will appear on the
display and the Option menu will close.
FINISH
STEREO
TUNED
TP FM101.30MHz
SW
C
R
Traffic info broadcast station (Frequency)
SR
If the receiver cannot find a traffic station, "TP Not
Found" will appear on the display, and the Option
menu will shortly close.
SW
C
R
SR
FM/AM tuning
VOL.
SW
C
L R
SL SR
i Cursor B / C
to
VOL.
SW
C
R
L
SL SR
33
En