Husqvarna LZ30, LZ30C Operator's Manual page 30

10. When the engine starts, immediately release
the ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5
seconds each time. If the engine does
not start, wait about 10 seconds before
retrying.
11. Push the choke control in gradually when the
engine has started.
12. Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed,
"half throttle", for 3-5 minutes before loading
it too heavily. USE FULL THROTTLE WHEN
MOWING
(no choke).
WARNING!
Engine exhaust and certain
vehicle components contain
or emit chemicals considered
to cause cancer, birth defects
or other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.
30 30
- -
English English
OPERATION
Return to run position
Press in the choke control
Set the engine speed
8011-743
8011-508
8011-754