Maintenance Schedule - Husqvarna 968999268 Operator's Manual

Husqvarna zero turn riding mower operator's manual

Hide thumbs

Table Of Contents

Table of Contents

Maintenance

Engine (4)

Check oil level

Change oil and filter (1)

Clean the air filter's (3)

Replace air filter's (3)

Check for fuel and oil leakage

Clean cooling flanges (3)

Check cooling air inlet

Check fuel pump's air filter

Replace fuel filter

Replace plugs

Hydraulics

Check oil level

Check for oil leaks

Change hydraulic oil (2)

Change oil filter (2)

Electrical

Check battery

Check the safety system

Lubricate

Left and right brakes

Left and right motion control shafts

Left and right deck struts

Deck idler arm

Pump idler arm

Caster swivels

Caster tires (5)

Deck lift lever

Throttle cable

Choke cable

Cutter housings

General

Check bolts and nuts

Check cutting deck

Clean cutting deck (3)

Clean pump compartment (3)

Check tire pressure (15 psi)

Check belts

Check and adjust throttle cable

Notes:

1. Change engine oil and filter after first 50 hours and then every 100 hours.

2. Change hydraulic oil and filter after the first 250 hours or season and then every 500 hours.

3. During dusty or dry conditions cleaning and replacement should be more frequent.

4. Refer to engine manual for more information.

5. Foam filled tires or solid tires will void the warranty.

MAINTENANCE