Replacing A Drive In The Upgrade Bay; Replacing A Hard Drive - HP Notebook PC User Manual

6. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
7. Turn on the computer.

Replacing a drive in the upgrade bay

The upgrade bay can hold either a hard drive or an optical drive.

Replacing a hard drive

CAUTION:
Shut down the computer before removing the hard drive from the upgrade bay. Do not remove the
hard drive while the computer is on, in the Sleep state.
If you are not sure whether The computer is off. turn the computer on by pressing the power button.
Then shut down the computer through the operating system.
To remove a hard drive from the upgrade bay:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6. Remove the battery (see
7. Remove the service door (see
8. Remove the hard drive screws from the upgrade bay.
9. Loosen the upgrade bay screw (1).
To prevent information loss or an unresponsive system:
Inserting or removing the battery on page
Removing or replacing the service door on page
47).
61).
Using hard drives 65