Programming A Scan List (Gp580 Radios Only) - Motorola GP540 User Manual

Note: The programming-mode annunciator, K, is
displayed while list view mode is active.
• The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
• The dot of the priority scan annunciator, H,
blinks if the current displayed member of the
scan list is a priority 1 mode, and is solid if the
current displayed member of the scan list is a
priority 2 mode.
Programming a Scan List
(GP580 radios only)
The program scan list feature allows you to program
the members of the scan list associated with the
currently selected mode.
To program a scan list
Press / until
1.
PROG is displayed.
Press l (the soft-
2.
key below PROG).
Press l (the soft-
3.
key below SCAN).
The display shows
the current mode
selected.
PROG
SCAN PHON CALL
For example
FIRE DEPT
4. Use the mode selector knob to select the
required talkgroup zone.
Press , or / to select the required
5.
zone. If the scan status annunciator G is
displayed, the mode is part of the scan list.
6. Press the select key to change the scan
mode (See "Scan Modes" on page 38.).
7. After making all the changes, select the
required operating mode.
8. Press the HOME key, or the PTT switch, or
turn the mode selector knob to commit all
the changes made.
Note: The programming-mode annunciator, K,
blinks while program mode is active.
• The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
• The dot of the priority scan annunciator, H,
blinks if the current displayed member of the
scan list is a priority 1 mode, and is solid if the
current displayed member of the scan list is a
priority 2 mode.
English
37