Table of Contents
Advertisement
On vehicles with navigation system
In AUTO mode, the vehicle's interior
temperature is independently
regulated for the driver and
passenger. If the driver's side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature.
1.
Press the AUTO button. The
indicator in the button comes on.
2.
Set the desired temperature by
pushing
or
on the driver's
side temperature control bar. The
selected temperature will show in
the upper display.
When you push the passenger's side
temperature control bar, the
indicator in the DUAL button comes
on and the driver's side and
passenger's side temperature can be
controlled independently (see page
167
).
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set the temperature to its
lowest limit (
) or its highest
limit (
), the system runs at
full cooling or heating only. It does
not regulate the interior temperature.
In cold weather, the fan will not
come on automatically until the
heater starts to develop warm air.
Climate Control System
Semi-automatic Operation
You can manually select various
functions of the climate control
system when it is in the AUTO mode.
All other features remain
automatically controlled.
On vehicles without navigation system
Making any manual selection causes
the word AUTO in the display to go
out.
On vehicles with navigation system
Press the A/C button to view the
A/C manual control display.
Making any manual selection causes
the indicator in the AUTO button to
turn off.
163
Advertisement
Chapters
Table of Contents
