Connecting External Components; Connecting An Md Player Or A Tape Deck; Connecting An Md Recorder Or A Cd Recorder - Yamaha RX-E410 Manual

You can connect various audio components, such as an MD player, a tape deck or a YAMAHA iPod universal dock to the
receiver. Also you can connect an MD recorder or a CD recorder to the CD player using the DIGITAL OUT jacks. For
information on your external component, refer to the owner's manual supplied with each component.
Note
Do not connect the power cable of the receiver, CD player, or other components to the wall outlet until all cable connections are
completed.
Connecting an MD player or a tape
deck
If you connect an MD player or a tape deck to the receiver,
you can enjoy audio sources played on the component.
ANALOG
IN OUT
L
R
Audio pin cable
ANTENNA
75
UNBAL.
DOCK
CD FM
GND
IN
TAPE/MD
OUT
AM
AUX
R L
Receiver
1
Connect the TAPE/MD IN (L/R) jacks of the
receiver to the analog output jacks of an MD
player or a tape deck using a commercially
available audio pin cable.
2
To record audio output from the receiver,
connect the TAPE/MD OUT (L/R) jacks of the
receiver to the analog input jacks of an MD
player or a tape deck using a commercially
available audio pin cable.

Connecting External Components

MD player or
tape deck
CONNECTING EXTERNAL COMPONENTS
Connecting an MD recorder or a CD
recorder
If you connect an MD recorder or a CD recorder to the CD
player with a digital connection, you can make a digital
recording.
OPTICAL COAXIAL
or
Optical cable
LINE OUT DIGITAL OUT
OPTICAL COAXIAL
L
R
Connect the DIGITAL OUT (COAXIAL or
OPTICAL) jack of the CD player to the digital
input (coaxial or optical) jack of an MD recorder
or a CD recorder using a commercially available
coaxial or optical cable.
Notes
• The DIGITAL OUT jacks are compatible with PCM signals.
• The DIGITAL OUT (OPTICAL) jack is designed based on EIA
standards. To make a digital connection, use an optical cable
that meets EIA standards.
MD recorder or
CD recorder
Coaxial cable
TO RX-E410
CD player
15
En