o Put the gas seal into the elbow.
o Fully tighten the elbow and seal onto the gas rail.
o The elbow MUST be pointing in a downwards direction.
o Gas p
ressure may be checked on a semi-rapid hob burner.
Remove the appropriate injector and attach a test nipple. Light
the other burners and observe tha
with the gas standards in force.
IMPORTANT: On completion carry out a gas soundness
o
test.
Gas adjustment (Conversion to LPG)
All
wo
registered engineer.
IMPORTANT: Always isolate the
before changing the inj
flow of the burne s.
rk
must
be
carried
hob from the electricity supply
ectors and/or adjusting the minimum
r
o Remove the pan-stands, burners and
flame spreaders (A).
t the gas pressure complies
out
by
a
GASSAFE
29