Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable
Check this box to allow your camera to connect to your network
Wireless:
wirelessly.
Enter the network name(SSID) of the wireless network you want
SSID:
to connect to. You can also click the Site Survey button below to
choose an available network and fill in settings automatically.
Channel:
If you are using Ad-Hoc as your connection mode, select the same
channel that is being used by your wireless network.
Connection
Select the connection mode used by your wireless network. In most
Mode:
cases, you should select Infrastructure. Ad-Hoc is only used if your
camera is directly connecting to another PC or device.
Site Survey:
Clicking this button will allow you to select an available wireless
network to connect to, and will fill in the necessary settings for you.
Wireless
Select the wireless security mode used by your wireless network. If
Security Mode:
you select WEP or WPA-PSK/WPA2-PSK, enter the password for your
wireless network in the text box that appears.
D-Link DCS-933L User Manual
Wireless Setup
25
25