Table of Contents
Advertisement
622715-00 Master Remote manual
2/4/04
9:17 AM
Page 7
BUTTON FUNCTIONS, cont.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of
VCRs, you might need to press the REC button
once, then press it again for three seconds.
RECORD, PLAY, STOP, REW, FF,
PAUSE VCR control buttons operate
your VCR even when the remote is set
to operate the TV. Also operates DVD
Scan -/+.
EXIT Used to exit menu functions.
NAViGATION AREA Up, down, left, right.
INFO displays/selects on-screen channel
information, etc.
TV/VCR/INPUT
For some TVs, press repeatedly to
select from available viewing sources
(antenna, cable box, VCR, etc.).
CHANNEL UP/ DOWN Changes the
channels.
MUTE Turns off the TV sound while the
picture remains.
LAST Returns to the previously selected
channel.
CAMERA SCAN
Scans through cameras and receivers in
the selected ZONE. For more information
see page 12.
HOUSE ON / OFF
The HOUSE ON button will activate all
the Lamp Receivers, Bulb Receivers and
Hardwire Switches. The HOUSE OFF
button will deactivate all Freewire units in
your system.
Room ON/OFF buttons
These two buttons turn on and off all
three Freewire units set to the UNIT
CODE shown through the opening on
the lid below. Lid shown here removed.
ZONE SELECTION WHEEL
7
Advertisement
Table of Contents
