Table of Contents
Advertisement
Registering one-touch speed
dialing numbers and names
One-touch speed dialing allows you to dial a number by pressing a single button. Before you can
use one-touch speed dialing, you must register the receiving number with your fax.
You can also register the name of the party; the name appears on the printout of the one-touch
speed dialing list.
1
Press [Function].
2
Use [ ] or [ ] to select <TEL REGISTRATION>, then press [Start/Copy] twice.
01=
3
Use [ ] or [ ] to select the number of the one-touch speed dialing button (01-05) under
which you want to register the number.
If a number is already registered under this one-touch speed dialing button, the number is displayed on
the LCD*.
4
Enter the party's number (up to 50 digits) using the numeric buttons, then press [Start/
Copy] to register the number.
5
Enter the party's name (up to 16 letters) using the numeric buttons (see pp. 2-2, 2-3), then
press [Start/Copy]to register the name.
6
To assign additional one-touch speed dialing numbers, start from step 3.
To finish, press [Stop].
* To delete the name and number registered under the one-touch speed dialing button, press [Clear] and
[Start/Copy] after you perform steps 1 to 3 above.
For user convenience, the destination label provided with your fax should be fitted over the one-touch
speed dialling buttons on the left of the operation panel.
2
2-7
Advertisement
Table of Contents
