11. ASSEMBLY HINTS
11.1 Assembling the LCD
1
Note that there are 2 thin corner marking lines
(as shown in the picture) on the PWB for LCD
alignment.
3
Protect the LCD with protection foil and attach the
connector of the FRAME ASSY to the PWB before
assembling the LCD.
22
Issue 1
CONFIDENTIAL
Copyright © 2008 NOKIA. All rights reserved.
2
Place the LCD ADHESIVE on the PWB and make
sure that the ADHESIVE is properly glued to the
PWB.
4
Attach the LCD connector.
E55 RM-482, RM-483
Service Manual Level 1&2