Turbo - Dry" Drying System - Electrolux Diva Service Manual

7.3 "TURBO - DRY" DRYING SYSTEM

The "Turbo Dry" system is characterized by an integrated closed circuit in which the hot air is
circulated in a mono-directional convection movement onto a cold wall; no air is drawn in from the
exterior.
- This drying system is based on the forced circulation of the hot air produced during the hot rinse,
where the steam (hot, humid air) is drawn in by the fan located inside the upper duct and then
ducted towards the condenser in the fill tank, from where it returns to the tub via the steam venting
ring.
- The condenser is a condensation chamber filled with water (cold wall) against which the hot air is
ducted. This contact between the hot air and the cold wall generates the process of condensation.
- This forms a closed condensation circuit which does not expel steam to the exterior, from which the
circuit is isolated.
The fan is not switched on continuously, but pauses at intervals.
The drying time is variable and pre-defined for each washing cycle.
SOI/TD - PR 32/32 599 38 72-30